Weishaupt WTC 60-A Operations Instructions download pdf (Page 19)

Electrical installation by qualified personnel only!

Local regulations and codes of practice, as

well as regulations from the energy supplier

must be observed.

Mains and emergency switch

The external mains switch for the heating system must

have at least 3 mm contact distance.

☞ Connection to plug assignment, Ch. 4.6.1.

Electrical connection

The gas condensing boiler WTC is wired ready for

connection. The cover of the electrical installation duct

must be removed for the electrical installation.

Insert the cable from the rear through the recess into the

unit.

The electrical connection must be carried out by a

qualified electrician. Changes to the internal boiler wiring

are not permitted.

Shell clamps should be used if flexible

cables are connected.

Approved sleeve cable should be used for

all other connection lines.

4.6 Electrical connection

DANGER

ATTENTION

Plug cover

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 89 90

No comments

Weishaupt WTC 60-A Operations Instructions Page 19